Chapter 8
8-2
8.2 Warning Table
8.2.1 Warnings
0023-3205
iPF650 / iPF655
* Codes represent the numbers that are displayed in DISPLAY in service mode and that are recorded in PRINTINF. Messages that are not accompanied by a code
indication are not logged.
T-8-2
Display massage Code* Condition detected Action
Ink Level: Check 0180104-1000 BK ink tank near-empty Renew the ink tanks.
Ink Level: Check 0180101-1001 Y ink tank near-empty
Ink Level: Check 0180102-1002 M ink tank near-empty
Ink Level: Check 0180103-1003 C ink tank near-empty
Ink Level: Check 0180106-1006 MBK ink tank near-empty
Ink Level: Check 0180106-1007 MBK2 ink tank near-empty
Problem with Printhead.
Chk printing results
01800500-1010 Number of non-discharging nozzles in printhead:
Warning level
Clean the printheads. Renew the printheads.
Identify the head management sensor unit.
Prepare for maint cart
replacement.
01841001-281A Maintenance cartridge near-full Replace the maintenance cartridge.
Prepare for parts
replacement.
Call for service.
Parts counter W1 level Check the parts counter in service mode.
Parts replacement time has
passed.
Call for service.
Parts counter W2 level After checking the parts counter in service mode,
replace any part whose counter is nearing the error
value.
GARO W1221 01341221-1030 GARO (image mode): Unknown command Verify the transmitted data before reprinting.
GARO W1222 01341222-1031 GARO (image mode): Invalid parameter count (no
parameters)
GARO W1223 01341223-1032 GARO (image mode): Required parameter missing
GARO W1225 01341225-1034 GARO (image mode): Other warning
GARO W1226 01341226-103A GARO (image mode): Image processing table error
GARO W1231 01341231-1035 GARO (setup): Unknown command
GARO W1232 01341232-1036 GARO (setup): Invalid parameter count
GARO W1233 01341233-1037 GARO (setup): Required parameter missing
GARO W1234 01341234-1038 GARO (setup): Data out of bounds
GARO W1235 01341235-1039 GARO (setup): Other warning
End of paper feed.
Cannot feed paper more.
Forced feed limit Check the remaining quantity of roll media.
This type of paper is not
compatible with HP-GL/2.
01860006-1015 Non-support paper of HP-GL/2 Exchange for the compatible paper to HP-GL/2.
GL2:W0501
The memory is full.
01340501-1040 Memory full (HP-GL/2) Check if there is the non-image area of the print.
Verify the transmitted data before reprinting.
GL2:W0904
The memory is full.
01340904-1048 Overflow of Polygon buffer (HP-GL/2)
GL2:W0903
The memory is full.
01340903-1047 Overflow of replot buffer (HP-GL/2)
GL2:W0502
The parameter is out of
range.
01340502-1041 Invalid parameter (HP-GL/2) Verify the transmitted data before reprinting.
GL2:W0504
This command is not
supported.
01340504-1043 Invalid command (HP-GL/2)
Mail box nearly full.
Delete unwanted data
011A1001-2901 The free hard disk space left for Personal Boxes in the
printer's hard disk does not have more than 1 GB,
combined.
Delete unneeded jobs stored in Personal Boxes.
Mail box full.
Now printing without
saving data.
01861003-2902 100 jobs are stored in the Personal Box. Delete unneeded jobs stored in Personal Boxs.
Not much ink is left. Prepare
to replace the ink.
01810103-1003 C ink tank near-empty Renew the C ink tank.
Not much ink is left. Prepare
to replace the ink.
01810102-1002 M ink tank near-empty Renew the M ink tank.
Not much ink is left. Prepare
to replace the ink.
01810101-1001 Y ink tank near-empty Renew the Y ink tank.
Not much ink is left. Prepare
to replace the ink.
01810106-1006 MBK ink tank near-empty Renew the MBK ink tank.
Not much ink is left. Prepare
to replace the ink.
01810104-1000 BK ink tank near-empty Renew the BK ink tank.
Ink tank is empty.
Replace the ink tank.
01810303-1403 C ink tank empty Renew the C ink tank.
Ink tank is empty.
Replace the ink tank.
01810302-1402 M ink tank empty Renew the M ink tank.
To Next Page
Loading...
Need help?
General
