Chapter 3
3-3
3.1.2 Reinstalling the Printer
3.1.2.1 Reinstalling the Printer
0023-3194
iPF650 / iPF655
1. Installing the printer on the same floor
If ink has not been drained from the printer when moving it to another place on the same floor, then an operation check (Test Print) needs to be performed after the
printer is moved to a new location.
2. Installing the printer on a different floor
If ink has been drained when transporting the printer to a different floor, follow the installation procedure below. It is nearly identical to the procedure when install-
ing for the first time.
1) Unpack the printer.
2) Remove the cushioning materials and tape.
3) Reattach the maintenance cartridge.
5) Connect the power cord and interface cable.
6) Turn on the power and following the instruction in the message to install the ink tank. The ink is filled.
7) Load the media, and perform the operation check.
To Next Page
Loading...
