Canon ImagePROGRAF iPF650 Series - Page 171

Chapter 4
4-37
Memo:
The mist fan [1] and mist exhaust duct [2] can be removed together.
F-4-86
Precautions about Reinstallation of Mist Exhaust Duct
Make sure that the protrusion [1] on the mist exhaust duct fits in the notch [2] on the side plate.
F-4-87
c) Platen Suction Fan
Removing the Platen Suction Fan
1) Remove the output guide.
2) Remove one screw [1] and disconnect one connector [2] to remove the platen suction fan [3].
F-4-88
[2]
[1]
[2]
[1]
[2]
[1]
[3]