Chapter 5
5-3
5) If paper dust has accumulated in the suction holes [1] on the Platen, the borderless printing ink grooves [2], use the included Cleaning Brush [3] to wipe it away.
F-5-3
MEMO:
If the Cleaning Brush is dirty, rinse it in water.
4) Using a damp cloth that you have wrung out completely, wipe inside the Upper Cover to clean it. Wipe away any ink residue on all over the Platen [1], the Pinch
Roller Unit [2], the Borderless Printing Ink Grooves [3], the Output Guide [4], and so on.
F-5-4
[1][2] [3]
[1]
[4]
[3] [2]
To Next Page
Loading...
