Note
• The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.
• The Stand is normally offered as an optional accessory, but either one or the other of the Stand may be inclu-
ded as a standard accessory in some sales regions and periods.
• The output stacker of the Printer Stand ST-26 has a regular position and an Extended position A.
For details on the extended position, see "Using the Output Stacker."
→P.669
• The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look different
from the appearance of your printer in some cases.
Printer Parts
>
Optional accessories
>
Stand
iPF655
8
712
To Next Page
Loading...
