4- 34
îš‹ Transporting the Printer
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
8
Close and lock all the ink tank covers and
close the right cover.
Please Wait.. appears followed by Ink Draining
while the ink is sucked from inside the tubes. This
processing requires about 4 minutes to complete.
The printer switches off automatically once
processing is completed.
9
Disconnect the power cord and the interface
cable.
10
Remove the roll holder.
11
Lower the lever of the holder stopper,
remove the stopper, remove the roll from the
roll holder, then store the roll holder and the
holder stopper.
12
Open the upper cover.
Important
z Do not touch any areas other than those indicated.
This could damage the printer.
To Next Page
Loading...
Need help?
General