Canon iR3530 - Sample Print

Sample Print
2-51
2
Introduction to the Mail Box Functions
Sample Print
Before making multiple prints of a document stored in an inbox, you can print a sample of it to
check its contents or the print results with the settings that were set when the document was
stored.
IMPORTANT
[Sample Print] is usually grayed out when multiple documents are selected until you press [Merge
Documents] and select the Collate, Offset Collate, Rotate Collate, or Staple mode. [Sample Print] is
grayed out if the Group mode is set.
NOTE
You can make a sample print even when one print is specified.
1 Select the document stored in an Inbox ➞ display the Change Print
Settings screen.
❑
Select the desired inbox number and the document to print.
❑ Press [Print].
If necessary, see the screen shots in steps 1 to 5 of "Printing Documents Stored in an
Inbox," on p. 2-17.
The Print screen appears.
2 Press [Sample Print] ➞ [Start Print].
Printing starts and one sample print is output.