Canon iR3530 - Storing New Standard Settings

Customizing Copy Settings
6-9
6
Customizing Settings
Storing New Standard Settings
You can store your own copy settings as the Standard Settings.
To store your own standard settings, specify the desired settings on the Copy Basic Features
screen and/or the Special Features screen, and then follow the procedure below.
1 Press ➞ [Copy Settings] ➞ [Standard Settings].
2 Press [Store].
3 Press [Yes].
To cancel storing the currently displayed settings as the Standard Settings, press [No].
The message <Stored in memory.> appears for approximately two seconds on the touch panel
display.
The displayed settings are stored as the Standard Settings.
NOTE
The settings displayed are the currently set copy settings. Press [ ] or [ ] to display any copy
settings that do not fit into the display area.