• To set by using the operation panel
Press the Setup button, select Device settings and Output settings in this order, and then set Prevent
double-feed to ON.
Changing the Machine Settings on the LCD
• To set by using your computer
Open the printer driver setup window, and in Custom Settings in the Maintenance sheet, select the
Prevent paper double-feed check box, and then click OK.
To open the printer driver setup window, see How to Open the Printer Driver Setup Window.
Note
• Printing speed will be reduced if Prevent paper double-feed function is enabled.
Check7
Clean the paper feed roller.
Cleaning the Paper Feed Roller
Note
•
Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
747
To Next Page
Loading...
