Capron A72 User Manual

Appliances
Capron - 3141417 - 03/20 - EHG-0021-02EN 109
10
1 Heater
2 Hot water
3 Operating mode
4 Fan
5 Service menu
6 Setting the time
7 Warning symbol
8 Lighting (not used here)
9 Timer
Fig. 111 Display (operating unit)
 Open the regulator tap on the gas bottle and the gas isolator tap
"Heater/boiler".
 Turn rotary push button (Fig. 110,6) until the heater menu symbol
(Fig. 111,1) flashes.
 Press rotary push button.
 Turn rotary push button until required value is displayed.
 Press rotary push button to save the value set. The symbol in the status
line (Fig. 110,2) flashes until the room temperature set is reached. If you
do not wish to change the value originally set: Press back button
(Fig. 110,7).
 Turn temperature value back until OFF is displayed. Press rotary push
button to save.
 The required room temperature can also be changed in stand-by mode
by turning the rotary push button.
 Open the regulator tap on the gas bottle and the gas isolator tap
"Heater/boiler".
 Turn rotary push button (Fig. 110,6) until the hot water menu symbol
(Fig. 111,2) flashes.
 Press rotary push button.
 Turn rotary push button until the required value is displayed:
 OFF: Production of hot water is switched off.
 40°: Hot water is heated to 40 °C.
 60°: Hot water is heated to 60 °C.
 BOOST: Fast heating of hot water (boiler priority) for max.
40 minutes. The water temperature is then held at a higher level for
two reheating cycles (approximately 62 °C).
 Press rotary push button to save the value set. The symbol in the status
line (Fig. 110,2) flashes until the hot water temperature set is reached. If
you do not wish to change the value originally set: Press back button
(Fig. 110,7).
 Turn rotary push button until OFF is displayed. Press rotary push button
to save.
Switching on the heater:
Switching off the heater:
Switching on production of
hot water:
Switching off production of
hot water:

Capron A72 Specifications

General

Brand	Capron
Model	A72
Category	Caravans
Language	English