Cardinal 190 - Network Configuration; Connecting to 190-WIFI Access Point (Ad Hoc); Connecting to an Existing Network; Reset to Defaults - Jumper J1

8400-M022-O1 Rev K  Model 190 Indicator
104
APPENDIX D – 190-IP Option
Features
Standard RJ45 Ethernet port
Embedded Web server
10/100Mb Ethernet – auto-sensing
No firmware updates necessary to the 190 STORM
Easy configuration through a Web interface
High-performance processor (12 MIPS at 48 MHz, 22 MIPS at 88 MHz)
E-mail client capability
Password protection
Status/diagnostic LEDs
Onboard Status/Diagnostic LED’s
The 190-IP option card contains three (3) LEDs to indicate the communication status of the
Ethernet TCP/IP connection.
LED
Indication
Description
D1 TXD Indicates data transferred from the 190
D2 RXD Indicates data received from the XPORT module
D3
PWR
Indicates power applied to the option card
D3
D2
D1