Cardinal 190 - Key Lockout Feature; LoCoUt; LCoUt?; Key Lockout Status

8400-M022-O1 Rev K  Model 190 Indicator
33
Serial Input/Output
Sio
With sio displayed, press the TARE  key. The display will change to baud=. Proceed to
the baud= parameter.
Sio?
With sio? displayed, press the TARE  key. The display will change to no. Press the
Fn/ key to toggle to yes and press the TARE  key. The display will change to
baud=. Proceed to the baud= parameter.
Otherwise, to skip Serial Input/Output setup, press the TARE  key to advance to the
print?. prompt.
bAUd= (Serial Interface Baud Rate)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new baud rate setting for the serial ports and
press the TARE  key to save it. Allowable settings are:
12 = 1200 Baud
24 = 2400 Baud
48 = 4800 Baud
96 = 9600 Baud
19 = 19200k Baud
38 = 38400 Baud
76 = 76800 Baud
Prty= (Serial Interface Parity Setting)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and press the TARE  key to save
it. Allowable settings are:
0 = No Parity with 8 data bits
1 = Odd Parity with 7 data bits
2 = Even Parity with 7 data bits