Cardinal 190 - Display Backlight Color Setup

8400-M022-O1 Rev K  Model 190 Indicator
47
Display Backlight Color Setup
CoLorS
With Colors displayed, press the TARE  key. The display will change to show dflt=.
Proceed to the dflt= parameter.
Color?
With Color? displayed, press the TARE  key. The display will change to no. Press the
Fn/ key to toggle to yes and press the TARE  key. The display will change to dflt=.
Proceed to the dflt= parameter.
Otherwise, to skip the Display Backlight Color setup, press the TARE  key to reset the
indicator and return to the normal weight display.
dflt= (Default Display Backlight Color)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and press the TARE  key to save
it. Allowable settings are:
0 = No Backlight
1 = Red Backlight
2 = Green Backlight
3 = Yellow Backlight
4 = Blue Backlight
5 = Pink Backlight
Under= (Checkweigher “Under” Backlight Color)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and press the TARE  key to save
it. Allowable settings are:
0 = No Backlight
1 = Red Backlight
2 = Green Backlight
3 = Yellow Backlight
4 = Blue Backlight
5 = Pink Backlight
aCCpt= (Checkweigher “Accept” Backlight Color)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and press the TARE  key to save
it. Allowable settings are:
0 = No Backlight
1 = Red Backlight
2 = Green Backlight
3 = Yellow Backlight
4 = Blue Backlight
5 = Pink Backlight