8400-M022-O1 Rev K Model 190 Indicator
Onboard Status/Diagnostic LED’s
The 190-WiFi option card contains four (4) LEDs to indicate the communication status of the
wireless connection.
D1 DISC
This LED indicates that Discovery Mode is active on the 190-
WIFI. Discovery Mode affects whether the 190-WIFI can see
(find) computers and devices on the network and whether other
computers on the network can see the 190-WIFI.
D2 TXD This LED will illuminate when the 190-WIFI has been successfully
connected to a network and will flicker when there is data activity
over the wireless network.
D3 CON
This LED displays the communication status. It will be ON or
flashing rapidly when communications between the 190-WIFI and
the wireless network are established.
This LED will illuminate to indicate the 190-WIFI is in the process
of resetting the configuration. When the reset to defaults is
complete you should see the LED flash 5 times and then go out
when it is complete.
To Next Page
Loading...
