Cardinal 190 - Fn; Key Combination Features

8400-M022-O1 Rev K  Model 190 Indicator
45
Function Setup
fUnC
With FUnC displayed, press the TARE  key. The display will change to show Hold=.
Proceed to the Hold = parameter.
FUnC?
With FUnC? displayed, press the TARE  key. The display will change to no. Press the
Fn/ key to toggle to yes and press the TARE  key. The display will change to HoLd=.
Proceed to the HoLd= parameter.
Otherwise, to skip the Options Setup, press the TARE  key to advance to the
Colors prompt.
IMPORTANT! The Hold, Count, and Live Weight Features should not be
enabled if the Legal-For-Trade option (LFt=yes) was selected during setup.
Also, only one of the features Hold, Count, Peak Hold, Checkweigher, or Live
Weight can be enabled at a time.
HoLd= (Hold Function)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle the setting and press the TARE  key to save it.
Yes No
Hold Function is Enabled
Hold Function is Disabled
CoUnt= (Count Function)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle the setting and press the TARE  key to save it.
Yes No
Count Function is Enabled
Count Function is Disabled
Ti-da= (Time and Date)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle the setting and press the TARE  key to save it.
Yes No
Time and Date is Enabled
Time and Date is Disabled