Cardinal 190 - Fn; Key Functions; Hold; Count; Time and Date

8400-M022-O1 Rev K  Model 190 Indicator
44
Prty= (Optional Serial Interface Parity Setting)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and press the TARE  key to save
it. Allowable settings are:
0 = No Parity with 8 data bits
1 = Odd Parity with 7 data bits
2 = Even Parity with 7 data bits
Cont2= (Continuous Output on Optional Serial Interface)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle the setting and press the TARE  key to save it.
YES
= Continuous Output on Optional Serial Interface
no
= No Continuous Output on Optional Serial Interface
IMPORTANT! The setting for the type= is only applied when the opt=
parameter is set to 1 and the Cont2= parameter is set to YES.
tyPE= (Continuous Output Format)
Press the TARE  key to show the current setting. If the setting displayed is acceptable,
press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle the setting and press the TARE  key to save it.
0 = Continuous Output uses SMA format
1 = Continuous Output uses Cardinal Scoreboard format
NOTE: Refer to the CONT1= Continuous Output on Serial Interface, tYPE= parameter for
a description of output formats.