8400-M022-O1 Rev K Model 190 Indicator
EACH= (Piece Weight Print Location)
Press the TARE key to show the current setting for the Piece Weight Print Location. If
the setting displayed is acceptable, press the TARE key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new location and press the
TARE key to save it.
CRLF= (Carriage Return Line Feed) - Data Format Termination
Data transmitted from the serial I/O port can be terminated with a single carriage return and
either no line feed or a single line feed command.
Press the TARE key to view the current setting. A YES on the display means the data will
be terminated with a carriage return AND a line feed while a no on the display means the
data will be terminated with a single carriage return only.
If the setting displayed is acceptable, press the TARE key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and press the TARE key to
save it.
EoP= (End-Of-Print Line Feeds)
At the end of data transmission to a printer, the indicator can transmit a pre-selected
number of line feed commands to space the paper in the printer to the desired position for
withdrawal or the next print.
Press the TARE key to show the current setting for the End-Of-Print Line Feeds. If the
setting displayed is acceptable, press the TARE key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new number of End-Of-Print
linefeeds and press the TARE key to save it. Allowable settings are: 0 through 99
To Next Page
Loading...
