Carrier ChillerVu - Page 75

Document revision history
Carrier® ChillerVu™
(OPN-PSM-MPCXPE) Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation and Start-up Guide 71 All rights reserved
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
Change description
Code*
Configuring BACnet device instance
and network number
New topic
C-D-E-RR
Adding the Carrier® ChillerVu™ into the
i-Vu® system and all subtopics
Updated to include i-Vu Standard and Plus and auto-generation.
C-D-E-RR
2/9/16
To attach expanders
Added step explaining jumper settings for connecting more than
one expander.
X-TS-RD-E-BR
12/3/15
To connect to LonWorks network using
the SLTA-10
Added step to enter the baud rate in Driver Properties
C-TR-GG-E-JN
To wire to Modbus RTU on Port S2
Added step to enter the baud rate in Driver Properties
C-TR-GG-E-JN
To set up the driver
Correction - Expanders driver page removed.
C-D
Wiring for communications
Corrected table to show BACnet/Ethernet and Telnet Diagnostics
C-D-DS
* For internal use only