CASE CONSTRUCTION CX160C - Page 203

6-MAINTENANCE
3.Cleanaroundthepre-lterbodythenremoveitusing
thewrenchprovidedwiththemachine.
4.Installthenewlterelement.Replacethelterbody
seal,theninstallthebody,turningituntilitisincontact
withthepre-lterhead.
NOTICE:Donotllthelterbodywithfuelbeforein-
stalling.
5.Tightenthebodyusingthewrench,thetightening
torquemustbefrom28-32N·m(20.7-23.6lbft).
NOTE:Tightennomorethanthespeciedtorque.
SMIL15CEXX738AB5
6.Replacethedrainplug(1)sealtheninstallthedrain
plug(1);thetighteningtorquemustbebetween8-
12N·m(5.9-8.9lbft)
NOTICE:Overtighteningcandamagetheseal.
NOTICE:Neverre-usethesealsofthelterbodyor
thedrainplug(1);theymustalwaysbereplacedwith
newseals.
7.Openthesupplylinevalveandbleedthesystem.
SMIL15CEXX739AB6
SMIL15CEXX736AA7
Fuelmainlter
Proceedinthesamemannerasforthepre-lter.See
"Pre-lterbleeding".
SMIL15CEXX740AA8
6-29