Data Transfer- Computer to Computer
Programmes, eActivities, Add-Ins, etc. can be transferred from
computer to computer.
Data transfer- computer to computer
Connect two computers with 3Pin-cable.
Open Link-application: set cable type to 3Pin-cable.
Devices set as follows:
Complete process for both devices with
[
AC/ON
]
Data transfer- computer to OHP
Connect the calculater with the Over-Head Projector using
the USB-cable, then an options menu will automatically appear.
Press
[
F4
]
to select the Projector/OHP as the output medium.
Data Transfer
• For data transfer, the LINK-application is used.
• Connect the computer with the 3Pin- cable.
Transmitter
~
[
F1
]
(
Transmit
)
~
[
F1
]
or
[
F2
]
(
select location
)
~
[
F1
]
(
Select
)
~ select Program, eActivity etc
with
(
down
)
and
[
F1
]
~
[
F6
]
(
Transmit
)
~
[
F1
]
(
YES
)
Receiver
Receiver
~
[
F2
]
(
Receive
)
~ enter password, “casio”
To Next Page
Loading...
