CEM BLADE - Clean Surfaces of the Instrument

39Routine Maintenance
4. If needed, wipe the inside of the trap with a lint-free cloth.
5. Re-install the trap cover.
Clean Surfaces of the Instrument
1. Ensure the instrument is idle.
2. Remove the racks from the fume cabinet. The racks may be cleaned using warm soapy water and rinsed with
water.
3. Wipe the inside of the fume cabinet and exterior of the instrument with a clean, lint-free cloth dampened with
warm soapy water. DO NOT use organic solutions to clean the BLADE.
4. Allow the fume cabinet to dry.