CEM BLADE - Important Safeguards; Safeguards

4
Important Safeguards
Important Safeguards
General guidelines for safe operation of the instrument are presented below and all specic safety messages are
located throughout the manual.
Safeguards
WARNING
Electrical shock hazard/Instrument damage. DO NOT connect unit to a line voltage other than
specied.
WARNING
Electrical shock hazard/Instrument damage. Requires dedicated, grounded outlet.
WARNING
DO NOT position the instrument such that it is difcult to access the power connector. The
power connector of the instrument must be readily accessible for mains disconnection if
needed.
WARNING
Replace fuses with fuses of the size and rating specied by the text adjacent to the fuse
holder or in the System Specications section of this manual.
WARNING
High voltages and microwave irradiation. Service can only be performed by an authorized CEM
service technician.
WARNING
Electrical shock hazard. DO NOT remove instrument covers. Only CEM authorized personnel
are allowed to remove instrument covers. Always disconnect the power cables before removing
the instrument cover.
WARNING
If any damage to the instrument is noted, DO NOT attempt instrument operation.
WARNING
DO NOT operate the instrument in the presence of ammable gases or fumes.