Cessna 177 SERIES Service Manual

HYDRAULIC
FLUID:
SPEC.
NO. MIL-H-5606
SPECIFIED
AVIATION
GRADE FUELS:
WARNING
ONLY AVIATION GRADE
FUELS ARE APPROVED
FOR USE.
ENGINE MODEL
APPROVED
FUEL GRADES
NOTE
LYCOMING O-320-E 80 (red) (formerly 80/87) 1
(1968)
100LL
(blue)
1
100
(green)
(formerly
100/130)
1
LYCOMING 0-360-A
100LL (blue)
1
(1969 and on)
100
(green)
(formerly
100/130)
1
NOTE
1. Compliance
with Avco Lycoming
Service Instruction
No. 1070J,
and all revisions thereto,
must be accomplished.
Refer also
to Avco Lycoming
Service Letters
L169 and L185, and
any other
applicable Service
Letters or
Service Bulletins,
for further information.
SPECIFIED AVIATION GRADE OIL:
AVERAGE AMBIENT
TEMPERATURE
(°F)/OIL GRADE
MAXIMUM
OIL INLET
TEMPERATURE
0° 10
°
20
°
300
40
°
500
60
°
70
°
80
°
90
°
°F
-SAE 40 OR SAE 50- 245
°
I S SAE 40-- 245
- -SAE
40 OR
SAE 30--
225
°
-SAE30
2100
NOTE
The
overlap
of oil grades
is based
on a
mid-range
of ambient
ground
temperatures
vs. maximum
oil inlet temperature.
Aviation
Grade
ashless dispersant
oil conforming
to
Avco Lycoming
Specification
No. 301,
and all revisions
and supplements
thereto,
MUST BE USED
except
as noted in
paragraph 2-21
herein. Refer
to the latest
issue
of Avco Lycoming
Service
Instruction
1014, and any
applicable
Service Bulletins
or Service
Letters,
for further recommendations.
Figure
2-3.
Servicing
(Sheet 2
of 4)
2-12
Change
6

Cessna 177 SERIES Specifications

General

Manufacturer	Cessna
Engine Type	Piston
Wingspan	35 ft 6 in (10.82 m)
Seating Capacity	4
Number Built	4, 295
Engine	Lycoming O-360
Horsepower	180 hp
Maximum Takeoff Weight	2, 500 lb (1, 134 kg)