Configuring Local and Remote System Administrators
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|175
Configuring Local and Remote System
Administrators
The Device > Administrators page lists the appliance administrators. Here you can:
n
Create new local administrators.
n
Configure the session timeout.
n
Limit login failure attempts.
n
Regenerate keys.
Administrators can also be defined in a remote RADIUS server and you can configure the
appliance to allow them access. Authentication of those remotely defined administrators is
done by the same RADIUS server.
Note - This page is available from the Device and Users & Objects tabs.
To Next Page
