SmartProvisioning
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|64
To define an activation key manually:
1. Select Activation Key.
2. Enter your own key, a string of any length.
3. In Confirm Activation Key, enter the key again. You cannot copy the text from the first
field.
To clear the key, click Clear.
To initialize certification:
The SIC certificate must be shared between the Security Management Server and the
SmartLSM Security Gateway. With this SmartLSM wizard, you create the key on the Security
Management Server (the SIC certificate and the IKE certificate for the selected gateway are
created when you finish this wizard). The certificate is pulled by the gateway when it first
connects to the Security Management Server after it is configured with the Check Point
appliance First Time Configuration Wizard.
1. If you know the IP address of the SmartLSM Security Gateway, select This machine
currently uses this IP address, and enter the IP address.
2. If you do not know the IP address of the SmartLSM Security Gateway, select I do not
know the current IP address.
3. Click Next.
VPN Properties
1. Select how to create a VPN certificate:
n
For a CA certificate from the Internal Check Point CA, select I wish to create a
VPN Certificate from the Internal CA.
n
For a CA certificate from a third party (for example, if your organization already has
certificates from an external CA for other devices), clear this checkbox and request
the certificate from the appropriate CA server.
2. Click Next.
To Next Page
Loading...
