Managing Active Devices
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|91
Toobar Buttons
n
Filter - Filter the list by servers, active devices, or known devices.
n
Refresh - Refresh the information in the list.
n
Details - Select a row in the list and click Details to show additional properties of the
device.
n
Save as - Save a selected device as a network object or server.
When you select this option, the New Network Object (see
"Managing Network Objects"
on page252
) window opens.
Enter the information in the fields and click Apply. Use these objects to reserve IP
addresses to MAC addresses in the DHCP server and also add this object name as a
device in the local DNS service. Network objects and server objects can be used in the
security configurations, for example in the Access Policy and IPS exceptions
A server object also allows you to configure access and NAT if applicable as part of the
object. If access and/or NAT are configured, automatic access rules are created in the
Access Policy Rule Base.
n
Start/Stop Traffic Monitor - Gather upload and download packet rates for active
devices.
This operation may affect performance. To stop, click Stop Traffic Monitoring.
n
Revoke Certificate - Revokes the certificate assigned to the device.
To Next Page
Loading...
