Managing Device Settings
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|74
Configuring a Configuration Script
To configure a configuration script in a Provisioning Profile:
1. Open the Security Gateway Profile window, and select the Configuration Script tab.
2. Select Manage Configuration Script centrally from this application.
3. Click Advanced.
The Profile Settings window opens.
4. Select one of these override profile settings:
n
Allowed
n
Denied
n
Mandatory
5. In Configuration Script, enter a script to run on the Small Office Appliance gateway.
6. Click Apply
Configuring a Provisioning Profile
For each set of configurations managed with a Provisioning Profile, you can decide which
settings have preference:
local
(not provisioned) or
central
(from SmartProvisioning individual
management or from Provisioning Profile).
To configure the settings of a Provisioning Profile:
1. In the Profiles List, right-click a profile and select Edit Provisioning Profile.
2. In the Profile window, click any category tab (other than General).
3. Select management settings for gateways that reference the profile:
n
Manage settings locally on the device: Each gateway that references this profile
has its own settings, configured locally (not in SmartProvisioning GUI). These
settings cannot be overwritten by changes to the Provisioning Profile or to the
SmartProvisioning gateway object. If you select this option, the Gateway window
appears: settings are defined to be managed locally on the device.
n
Manage settings centrally from this application: Each gateway that references
this profile gets its configuration for this setting from the Provisioning Profile or from
the SmartProvisioning gateway object.
4. If you selected to manage settings centrally, click Advanced.
The Profile Settings window opens.
5. Select an option for Overriding profile settings on device level is:
To Next Page
Loading...
