Check Point QUANTUM SPARK 1570 - Managing Network Objects

Managing Network Objects
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|252
Managing Network Objects
The Users & Objects view > Network Resources section > Network Objects page lists the
network objects defined in the system.
In this page you can add, edit, and delete network objects. Starting from R81.10.05, you can
also see where a network object used.
The most common use for network objects is to define a security policy and exceptions to it.
These objects can be used as hosts for the internal DNS service and their IP addresses can be
configured as fixed for the internal DHCP service.
These are the available network object types:
n
Single IP - Represents a device with a single IP address (host object).
n
IP Range - Represents a range of IP addresses.
n
Network - Represents a network.
n
Domain Name - Represents a Domain.
n
Device - Represents a device.
Note - In the R81.10.X releases, this feature is available starting from the
R81.10.05 version.