Check Point QUANTUM SPARK 1570 - Defining Smartlsm Gateways Using LSM CLI

Creating a SmartLSM Appliance Cluster
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|68
Defining SmartLSM Gateways Using LSM CLI
This is a sample SmartLSM CLI script that you can use to create a new gateway object and
associate it with a SmartLSM profile. Optionally, you can also set a SIC password and initiate a
SIC connection.
LSMcli <Server> <User> <Password> AddROBO CPSG80 <RoboName>
<Profile>
[-O=<ActivationKey> [-I=<IP>]]
Parameter Description
<Server>
The Security Management Server on which to create the gateway
object.
<User>
The username of the Security Management Server administrator.
<Password>
The password of the Security Management Server administrator.
<RoboName>
The name for the new gateway object.
<Profile>
The name of the SmartLSM profile to associate with the gateway.
<Activation
Key>
The SIC password.
<IP>
The IP address to use to initiate a SIC connection.
For more information, see the SmartProvisioning Administration Guide for your Management
Server version.