Controlling and Monitoring Software Blades
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|79
Controlling and Monitoring Software Blades
The Home > Security Dashboard page shows you the active blades and lets you quickly
navigate to the blade configuration page.
It also gives you:
n
Access to the basic settings of the blades with the Settings button (cogwheel icon) and
lets you activate the blades.
n
Access to statistics for each blade (graph icon)
n
Alerts you if there are blades that are missing licenses, service blades which are not up-
to-date, and active blades which require additional configuration (for example, site-to-
site VPN where the user did not configure any sites). When applicable, there is a triangle
in the upper right hand corner of the specified blade.
The software blades are shown in these groups on this page based on where they are
configured in the WebUI:
n
Access Policy - Contains the Firewall, Application & URL Filtering, User Awareness, and
QoS blades.
n
Threat Prevention - Contains the Intrusion Prevention (IPS), Anti-Virus, Anti-Bot,
Threat Emulation, and Anti-Spam blades.
n
VPN - Contains the Remote Access and Site to Site VPN blades. It also contains
certificate options.
You can click the tab name link or Software Blade link to access the tab for further
configuration.
To enable or disable a Software Blade:
1. Slide the lever of the specified blade to the necessary ON or OFF position.
2. When you turn off the Firewall blade, click Yes in the confirmation message.
Note - Software Blades that are managed by Cloud Services show a lock icon. You
cannot toggle between on and off states. If you change other policy settings, the
change is temporary. Any changes made locally are overridden in the next
synchronization between the gateway and Cloud Services.
To Next Page
Loading...
