Check Point QUANTUM SPARK 1570 - Wireless Active Devices

Wireless Active Devices
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|266
Wireless Active Devices
Important - This page is only relevant for versions up to R81.10.08. Starting in
R81.10.10, Active Devices and Wireless Active Devices are replaced by the Home
> Assets page.
The Logs & Monitoring view > Status section > Wireless Active Devices page shows the
devices connected to your gateway's wireless network.
The information for each connected device's network usage includes:
n
SSID – Name of the WiFi network
n
Type - Shows the connection type a device is connected with over WiFi.
Note - In the R81.10.X releases, this feature is available starting from the
R81.10.05 version.
n
Channel
n
Frequency
n
Signal Strength
n
RSSI – Received Signal Strength
n
Bandwidth
n
IP Address
n
MAC address