Check Point QUANTUM SPARK 1570 - Viewing Reports; Dr. Spark

Viewing Reports
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|271
Viewing Reports
See "Viewing Reports" on page93 .
Dr. Spark
With the Dr. Spark feature, you can check the Quantum Spark Appliance performance, sizing
and health status.
Note - The Dr. Spark feature is available as a separate tab starting from R81.10.08. In
earlier versions, the Dr. Spark buttons are available on the "Using System Tools" on
page275 page.
Action Description
Generate the Dr.
Spark Report
Saves a report that shows if the appliance passed or failed various
tests.
If the appliance fails a test, the report provides more details to
describe why it failed.
Note - In the R81.10.X releases, this feature is available starting
from the R81.10.05 version.
Procedure
1. Click Generate the Dr. Spark Report.
A message next to the button shows the progress.
Do not move to another WebUI page.
2. When the task completes, the button changes to Download Dr.
Spark Report.
3. Click Download Dr. Spark to download the report file.
Your web browser saves this file (DrSpark_<YYYY-MM-DD_
HH-MM-SS>.zip) in the default download folder.
4. When the download completes, the button changes to
Generate the Dr. Spark Report.
5. Extract the content of this ZIP archive.
6. Open the file index.html in a web browser.
Legend:
n
- The appliance passed this test.
n
- The appliance failed this test.
n
- General information for the administrator.
n
- This test was not applicable to this appliance.