Managing Device Settings
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|73
Configuring Hotspot
To configure hotspot settings in a Provisioning Profile:
1. Open the Security Gateway Profile window, and select the Hotspot tab.
2. Select Manage Hotspot settings centrally from this application.
3. Click Advanced. The Profile Settings window appears.
4. Select one of these override profile settings:
n
Allowed
n
Denied
n
Mandatory
5. Select Hotspot is activated on device to activate the hotspot.
6. Configure the fields:
n
Portal Title - Keep the default or enter a different title.
n
Portal message - Keep the default or enter a different message.
n
Terms of use - Select this checkbox to add an "I agree with the following terms and
conditions" checkbox on the Hotspot portal page. Enter the terms and conditions
text in the text box. When users click the "terms and conditions" link, the entered
text is shown.
n
Require Authentication - To require user authentication, select the checkbox.
n
Allow users from specific group - Select to allow access to a specific user group
and not all users. Enter the group's name in the text box.
7. Click Apply
To Next Page
Loading...
