Configuring High Availability
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|222
Notes:
n
You can use a Bond interface in the Active-Backup mode as a Sync interface
only in Centrally Managed appliances.
n
You can configure a maximum of two subordinate Bond ports when the Bond
serves as a Sync interface.
n
The two subordinate Bond ports can be connected directly between the
members or through a switch:
l
In a direct connection, the cable connects between the dedicated
subordinate Sync ports on the appliances.
l
With a switch, the cables connect between the dedicated subordinate
Bond ports on the appliances and the corresponding ports on a switch
between the appliances.
Note - A cluster in a Bridge Active/Standby mode is supported.
To Next Page
