Check Point QUANTUM SPARK 1570 - Page 49

Small-Scale Deployment Installation
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|49
To create a rule with a Security Zone:
After you associated a security zone object to the applicable interface on the gateway, you can
use it in a rule. To create a rule with a security zone, just add the security zone object to the
Source or Destination cell.
For example, to create a rule that allows internal users access to any external network, create
a rule with these fields:
Policy Field Value
Source InternalZone
Destination ExternalZone
Action Accept
Install On One of these:
n
Gateway or Cluster object
n
SmartLSM Security Profile
object
1. From the left navigation panel, click Security Policies.
2. In the top section, click Access Control > Policy.
3. Use the Add Rule buttons to position the rule in the Rule Base.
4. Click in the Name column of the new rule and enter the applicable text.
5. In the Source column of the new rule, click the + icon and select InternalZone from the
list.
6. In the Destination column of the new rule, click the + icon and select ExternalZone from
the list.
7. In the Action column of the new rule, select Accept.
8. In the Install On column of the new rule, click the + icon and select the applicable object.
9. Publish the SmartConsole session.