Chore-Time Chore-Tronics 3 Control - Clock and Miscellaneous Outputs

Control Setup Chore-Tronics® 3 Control
48
MT2398C
Clock Assignments
2. Press the Clock button.
All of the Clock output Relays are assigned
here.
1. Select the Main menu button. Select the
Setup button from the Main
Menu screen. Finally, select the Outputs
button.
Light Clock
1. Press the Light button.
2. Up to four Light clocks can be assigned
with four relays for each Light clock. Use the
Add button to add additional clocks.
External Light Dimmer Control
3. In the "An Out" column, select from the drop-
down the Analog out (on the IO board) used to
control the Dimmer.
4. In the Output from column select ether 0-10
vdc or 10 to 0 vdc.
( 0 vdc = no light or 10 vdc = no light)
2
3
4