Storage, Freight, Maintenance & Cleaning
Storage
When not in use, please pack the device properly and store in a suitable environment.
Freight
Please pack the device carefully before moving it. If any of the original packing material is
missing, please use suitable alternative material and mark it “fragile” and “keep away from
water” to avoid damaging to the product.
This product is a piece of precision test equipment, so please do not drop or hit it.
Maintenance
In case of any malfunction or abnormality, please refer to the manual, or contact our local
distributor for prompt service. Do not touch any parts inside the instrument to avoid any
danger to yourself or damage to the product.
Regular check and calibration is required to ensure the device meets the product specification.
The suggested calibration period every 12 months.
Cleaning
Remove all connected wires and cables on the instrument before cleaning. Use a brush to
clean the dust on it. For internal cleaning, use a low-pressure air gun to vacuum the dust
inside or send it back to the distributors or agents of Chroma for cleaning.
To Next Page
Loading...
Need help?
General
