Chroma 19032 - Calibration Procedures

Descriptions of Panel
4-25
1. With the title list displaying “MAIN MENU”, press the numeric key [4] that corresponds to
CALIBRATION. The display will show “ENTER CALIBRATION PASSWORD”.
2. Using the numeric keys, input [7] [9] [3] [1] [ENTER].
3. After the [ENTER] key has been pressed, select [DEVICE].
4.10.2 Clear Memory
All stored test conditions in instrument memory (100 setups) may be cleared. NOTE: all
preset and option parameters are cleared as well as all memory locations. All parameters will
be reset to default values.
1. With the title list displaying “MAIN MENU”, press the numeric key [4] that corresponds to
CALIBRATION. The display will show “ENTER CALIBRATION PASSWORD”.
2. Using the numeric keys, input [8] [5] [2] [4] [6] [ENTER].
3. After the [ENTER] key has been pressed, the instrument displays the message: “Clear
Memory?”
4. Press the [YES] Function Key to clear all memory.
5. Press the [NO] Function Key to abort the clear all memory function.
6. Press [EXIT] to return to MAIN MENU.
7. After the memory has been cleared, all option parameters need to be reset.
4.11 KEY LOCK Function
When KEY LOCK is ON, the LOCK status LED on the display is illuminated and the
MEMORY and TEST functions are operational.
Setting KEY LOCK:
1. When the title list displays “MAIN MENU”, if “LOCK” is not highlighted, press the numeric
key that corresponds to KEY LOCK [4], to display the “KEY LOCK” window.
2. Using the numeric keys, input [0][0][0][0] [ENTER] (See
Note 1 below).
3. After pressing the [ENTER] key the display will show the “MESSAGE” window with the
“LOCK” text block highlighted. Select whether to lock or not lock the “MEMORY RECALL”
function using the [YES], [NO] Function Keys.
4. Press [EXIT] to complete setting the KEY LOCK function.
Note
1. If the Security Code has been changed, [0][0][0][0][ENTER] will not work for KEY
LOCK. Use the new Security Code.
2. When the 19032 is powered down with KEY LOCK ON, it will boot to the TEST menu
when powered back ON.
Cancelling KEY LOCK:
1. When the title list displays “MAIN MENU”, if “LOCK” is not highlighted, press the numeric
key that corresponds to KEY LOCK [4], to display the “RELEASE KEY LOCK” window.
2. Using the numeric keys, input [0][0][0][0] [ENTER] (See
Note 1 above).
3. Press [EXIT] to complete cancelling the KEY LOCK function.