Chroma 19032 - Remote Control and Communication; GPIB;RS-232 Interface Operation

GPIB/RS232 Operation Description (IEEE-488.2)
5-1
5. GPIB/RS-232 Operation Description
(IEEE-488.2)
5.1 Guide
A computer can be used for remote control of the 19032 using either a GPIB (IEEE 488-1978)
or RS-232 interface.
The IEEE-488 (GPIB) address is defined in the [OPTION] submenu by selecting [MENU] [2]
and [GPIB].
The 19032 is in a remote control status when the REMOTE LED is ON.
To switch to Local from Remote press the [LOCAL] Function Key. (The [LOCAL] key may be
disabled by the LLO [Local lockout] command message.)
The only control functional under Remote operation is [LOCAL], which switches to Local, and
[STOP], which resets the unit.
5.2 GPIB Interface Specification
5.2.1 Adaptable Standard
IEEE488-1978 standard
5.2.2 Interface Capability
Code
Meaning
SH1
Source Handshake
AH1
Acceptor Handshake
T4
Basic Talker requirement
L4
Basic Listener requirement
SR1
Service request requirement
RL1
All remote/local requirement
PP0
No Parallel poll requirement
DC1
All device clear requirement
DT0
No Device trigger requirement
C0
No controller requirement