Chroma 19032 - Auto Range

Descriptions of Panel
4-13
2. The device will start the test when it receives a string command. The format is the
same as the Serial No. See the description of remote interface.
4.6.3 Auto Range
(1) Auto Range function set to ON.
(2) The current range set to high range i.e. 40mA (See Figure 4-4.)
TEST
MODE
SOURCE
LIMIT
RES.
OFFSET
01
AC
1.000 kV
40.00 mA
Get Cs
PAGE UP
PAGE DOWN
SCANNER-1
1 2 3 4 5 6 7 8
AC H
Remote
Lock
Offset
Error
Figure 4-4
Before ending the test 0.6 sec, if the tested current can be represented by low current range
then auto range to low (See Figure 4-5).