Chroma 19053 - Page 15

xiii
the section of “PROGRAM Setting”.
− Modify “DC withstand voltage test mode” in the section of
“PROGRAM Setting”.
− Modify “Insulation resistance test mode menu” in the section of
“PROGRAM Setting”.
− Modify “SCPI command” in the section of “Remote Command
Summary”.
− Add “the description of DWLL” in the section of “Each
Parameter Setting Data Description”.
− Add “the description of RNG” in the section of “Each Parameter
Setting Data Description”
− Add “Pause Mode menu and description” in the section of “Each
Parameter Setting Data Description”.
− Add the section of “Initial Inspection”.
Aug. 2006 1.8
− Modify “CE Statement of Conformity”
− Modify “the standard accessory of 19051/2/4” in “Inspection and
Examination”.
Nov. 2006 1.9
− Modify the description of Disposal in “Storage. Freight.
Maintenance. Disposal”
− Modify “the descriptions of RS-232/GPIB commands” in the
section of “Remote Command Summary”.
− Modify the description of “Preface” in the chapter of “Printer
Function”.
March 2007 2.0 Add “Material Contents Declaration”
Delete the description of Disposal in “Storage. Freight.
Maintenance. Disposal”
Jul. 2010 2.1 Modify the following sections:
− “CE Declaration”.
− Standard accessory description in “Inspection and
Examination”.
− “Hipot” item in the section of “Specifications”.
− Description in the section “Error Messages”.
− Add UL/TUV required descriptions.
− Add two new items in the chapter of “Precaution before Use”.
Delete the chapter of “Printer Function”.
www.valuetronics.com