Chroma 19053 - Remote Command Summary

HIPOT Tester 19051/19052/19053/19054 User’s Manual
* SAV <metric system value> Command
Save command.
This command is save the current status to memory, its’ metric system value range is 1 ∼
99.
* RCL <metric system value> Command
Recall command.
This command is recall the saved status, its’ metric system value range is 1 ∼ 99.
5.7 Remote Command Summary
SCPI command
The parameter syntax format of SCPI command includes the following.
Dual arrow symbol “< >” denote the defined parameter of SCPI command standard.
"< numeric _ value >" is metric system value, "< boolean >" is Boolean equation data and its’
value is 0 or 1. Vertical line " | " denotes OR parameter.
: SYSTem
: ERRor
: [NEXT]?
: VERSion?
: KLOCk < boolean >
⏐ON⏐OFF
: KLOCk?
: LOCK
: OWNer?
: REQuest?
: RELease
MEMory
: DELete
: LOCAtion < register number >
: FREE
: STEP?
: STATe?
: STATe
: DEFine < name >, < register number >
: DEFine? < name >
: LEAble? < register number >
: NSTAtes?
: SOURce
: SAFEty
: FETCh? [ < item > ] { , < item > }
: STARt
[: ONCE]
: OFFSet GET|OFF
: OFFSet?
: CSTandard
: STOP
: STATus?
5-6
www.valuetronics.com