Chroma 19053 - How to Select a Set of Memory; Delete Memory; Read Memory; Store Memory

HIPOT Tester 19051/19052/19053/19054 User’s Manual
4.5.2 How to Select a Set of Memory
1. When the state list shows "SELECT MEMORY", move the highlighted to the memory
which want to manage by Function Key UP, DOWN. Press Function Key SELECT is
shown the following menu:
1. ( 0 )
UP
2. ( 0 )
3. ( 0 )
DOWN
4. ( 0 )
5. ( 0 )
SELECT
SELE. MEMORY RMT LOCK OFST ERR
RETURN
2. At this time, follows Function Key instructions to read, store or delete this set of memory.
4.5.3 Delete Memory
If you want to delete test parameter data which be stored in memory, please follow the below
procedures to process.
1. Press Function Key DELETE when status bar shows [SELECT FUNC.].
2. Select the test parameter data of memory, which want to delete by using Function Key
UP, DOWN. Press Function Key DELETE and then show delete confirm window.
3. Press Function Key YES to confirm or press Function Key NO to cancel.
4.5.4 Read Memory
If there are many sets of test parameter values which be saved in main memory. Follow the
below procedures to recall test parameter.
1. Press Function Key RECALL when status bar shows [SELECT FUNC.].
2. Select the test parameter data of memory, which want to read by using Function Key UP,
DOWN.
3. Press Function Key SELECT and then show confirm window.
4. Press Function Key YES to confirm or press Function Key NO to cancel.
4.5.5 Store Memory
If you want to save test parameter data which be set in the memory. Please follows the
below procedures to process.
1. When status bar shows [SELECT FUNC.], press Function Key STORE.
2. Selecting the memory want to store by using Function Key UP, DOWN. Press Function
Key SELECT, the cursor become underscore blinking cursor.
3. At this time, input the memory name by using Function Key UP, DOWN.
4-6
www.valuetronics.com