Safety Symbols
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or damage to
he instrument, the operator must refer to an explanation in the
instruction manual.
Protective grounding terminal: To protect against electrical
shock in case of a fault. This symbol indicates that the te
minal
must be connected to ground before operation of equipment.
WARNING
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in personal injury. Do not proceed
beyond a WARNING sign until the indicated conditions are fully
understood and met.
CAUTION
The CAUTION sign denotes a hazard. It may result in personal
injury or death if not noticed timely. It calls attention to
procedures, practices and conditions.
This indicates important information or tips for the procedures and
applications, etc. The contents should be read carefully.
vii
www.valuetronics.com
To Next Page
Loading...
