Panel Description
Press [SYSTEM CONFIG] to start the system parameter setting screen as shown below:
Press [NEXT PAGE.] to start the system parameter setting screen as shown below:
Press [NEXT PAGE.] to start the system parameter setting screen as shown below:
The display parameter described as following:
CONTRAST:
To adjust the light or dark of the display. The value is being set on
"06" and the selector is
"00〜13".
The procedure is to move the cursor to the right of the CONTRAST by pressing
and adjust the value by pressing [ ] and [ ].
BACK-LIGHT:
To select the backbite of the display. The value is being set
"ON" . The range is
"ON/OFF".
The procedure is to move the cursor to the right of the BACK-LIGHT by pressing and
adjust it by pressing [ON] and [OFF].
To Next Page
Loading...
