Chroma 63200A Series User Manual

High Power Electronic Load 63200A Series Operation & Programming Manual
3-2
Table 3-1 Front Panel Description
Item
Name
Description
Refer to
1
Power switch
The AC power switch of Electronic Load.
2
VFD
The display shows the setting information.
3.2.1
3
HOTKEY
The shortcut keys for switching loading modes.
3.2.2
4
FUNCTION keys
There are A/B, RANGE, MODE, EXTEND, LOCK,
Config/Local, EDIT, SPEC, Short, Recall, Adva,
Save and Clear keys.
3.2.3
5
Entry keys
The numeric keys and ENTER key.
6
Arrow keys
These two keys are used to change the setting
page and select the desired form. They are also
used to move the cursor to the desired position
when editing parameters.
3.2.4
7
Push Button Rotary
Press down the push button rotary to enter into the
parameter setting page. When the settings are
done, press the push button rotary again to confirm
the setting.
3.2.4
8
USB HOST
USB HOST (not fully support yet).
VFD 3.2.1
The loading mode is displayed as below:
1. Parameter setting lines: The setting parameters of each mode.
2. Reading display: It displays the measured voltage (V) & current (I) & power (W).
3. Status line: It shows the mode, range, Load ON, Short ON and Von status.
4. Up & down scroll: When a down arrow appears, it means there are parameters in the
next page for setting.
5. HOTKEY: The shortcut for entering the mapped loading mode.
HOTKEY
There are 4 HOTKEYS that can switch the loading mode rapidly. When in a loading mode
(such as basic or Advance mode), simply press a HOTKEY can switch to the mode indicated.

Chroma 63200A Series Specifications

General

Brand	Chroma
Model	63200A Series
Category	Test Equipment
Language	English