Chroma 63200A Series User Manual

Remote Operation
4-47
Setting Parameters:None
Setting Example: None
Query Syntax: DIGitizing:WAVeform:DATA?<space><V | I>
Return Parameters:<DLABRD>, [Unit = None]
Query Example: DIG:WAV:DATA? V
DIG:WAV:DATA? I
SPECIFICATION Subsystem 4.3.2.10
SPECification[:PASS]?
Type: All Channels
Description: Request GO-NG result reference to all channels specifications.
Query Syntax: SPECification?
Query Example: SPEC? Return all channels GO-NG results.
Return Parameters:<CRD>, IDLE, GO, NG
SPECification[:PASS]:CURRent?
Type: Channel-Specific
Description: Request GO-NG result reference to current specification.
Query Syntax: SPECification[:PASS]:CURRent?
Query Example: SPEC:CURR?
Return Parameters:<CRD>, IDLE, GO, NG
SPECification[:PASS]:POWer?
Type: Channel-Specific
Description: Request GO-NG result reference to power specification.
Query Syntax: SPECification[:PASS]:POWer?
Query Example: SPEC:POW?
Return Parameters:<CRD>, IDLE, GO, NG
SPECification[:PASS]:VOLTage?
Type: Channel-Specific
Description: Request GO-NG result reference to voltage specification.
Query Syntax: SPECification[:PASS]:VOLTage?
Query Example: SPEC:VOLT?
Return Parameters:<CRD>, IDLE, GO, NG
SPECification:CURRent:C
Type: Channel-Specific
Description: Set the center-level current specification. The -1 mean don’t care.
Setting Syntax: SPECification:CURRent:C<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:CURR:C 10
SPEC:CURR:C 10mA
Query Syntax: SPECification:CURRent:C?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Ampere]
Query Example: SPEC:CURR:C?
SPEC:CURR:C? MAX
SPEC:CURR:C? MIN
SPECification:CURRent:H
Type: Channel-Specific

Chroma 63200A Series Specifications

General

Brand	Chroma
Model	63200A Series
Category	Test Equipment
Language	English