High Power Electronic Load 63200A Series Operation & Programming Manual
Description: Set the high-level current specification. The -1 mean don’t care.
Setting Syntax: SPECification:CURRent:H<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:CURR:H 10
SPEC:CURR:H 10mA
Query Syntax: SPECification:CURRent:H?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Ampere]
Query Example: SPEC:CURR:H?
SPEC:CURR:H? MAX
SPEC:CURR:H? MIN
SPECification:CURRent:L
Type: Channel-Specific
Description: Set the low-level current specification. The -1 mean don’t care.
Setting Syntax: SPECification:CURRent:L<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:CURR:L 10
SPEC:CURR:L 10mA
Query Syntax: SPECification:CURRent:H?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Ampere]
Query Example: SPEC:CURR:L?
SPEC:CURR:L? MAX
SPEC:CURR:L? MIN
SPECification:POWer:C
Type: Channel-Specific
Description: Set the center-level power specification. The -1 mean don’t care.
Setting Syntax: SPECification:POWer:C<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:POW:C 10
SPEC:POW:C 10mW
Query Syntax: SPECification:POWer:C?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: SPEC:POW:C?
SPEC:POW:C? MAX
SPEC:POW:C? MIN
SPECification:POWer:H
Type: Channel-Specific
Description: Set the high-level power specification. The -1 mean don’t care.
Setting Syntax: SPECification:POWer:H<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:POW:H 10
SPEC:CURR:H 10mW
Query Syntax: SPECification:POWer:H?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: SPEC:POW:H?
SPEC:POW:H? MAX
SPEC:POW:H? MIN
SPECification:POWer:L
Type: Channel-Specific
Description: Set the low-level power specification. The -1 mean don’t care.