Chroma 63200A Series User Manual

Remote Operation
4-49
Setting Syntax: SPECification:POWer:L<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:POW:L 10
SPEC:POW:L 10mW
Query Syntax: SPECification:POWer:H?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: SPEC:POW:L?
SPEC:POW:L? MAX
SPEC:POW:L? MIN
SPECification:TEST
Type: All Channels
Description: Start or close the all channel specification test.
Setting Syntax: SPECification:TEST<space><NRf>
Setting Parameters:<NRf>, OFF(0), ON(1)
Setting Example: SPEC:TEST ON
SPEC:TEST 0
Query Syntax: SPECification:TEST?
Query Example: SPEC:TEST?
Return Parameters:<CRD>, OFF, ON
SPECification:UNIT
Type: Channel-Specific
Description: Set the specific entry mode.
Setting Syntax: SPECification:UNIT<space><NRf>
Setting Parameters:<NRf>, VALUE(1), PERCENT(0)
Setting Example: SPEC:UNIT VALUE
SPEC: UNIT 0
Query Syntax: SPECification:UNIT?
Return Parameters:<CRD>, VALUE, PERCENT
Query Example: SPEC:UNIT?
SPECification:VOLTage:C
Type: Channel-Specific
Description: Set the center-level voltage specification. The -1 mean don’t care.
Setting Syntax: SPECification:VOLTage:C<space><NRf+>[suffix]
Parameters: Refer to respective specification for valid value range.
Setting Example: SPEC:VOLT:C 20
SPEC:VOLT:C 20mV
Query Syntax: SPECification:VOLTage:C?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Volt]
Query Example: SPEC:VOLT:C?
SPEC:VOLT:C? MAX
SPEC:VOLT:C? MIN
SPECification:VOLTage:H
Type: Channel-Specific
Description: Set the high-level voltage specification. The -1 mean don’t care.
Setting Syntax: SPECification:VOLTage:H<space><NRf+>[suffix]
Parameters: Refer to respective specification for valid value range.
Setting Example: SPEC:VOLT:H 20
SPEC:VOLT:H 20mV
Query Syntax: SPECification:VOLTage:H?[<space><MAX | MIN>]

Chroma 63200A Series Specifications

General

Brand	Chroma
Model	63200A Series
Category	Test Equipment
Language	English