Chroma 63600 Series User Manual

Remote Operation
5-51
maximum value of static load.
CURR:STAT:FALL MIN Set falling slew rate to the
minimum value of static load.
Query Syntax: CURRent:STATic:FALL?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:STAT:FALL?
CURR:STAT:FALL? MAX
CURR:STAT:FALL? MIN
CURRent:STATic:L1
Type: Channel-Specific
Description: Set the static load current for constant current static mode.
Setting Syntax: CURRent:STATic:L1<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:STAT:L1 20 Set the static load parameter L1 = 20A.
CURR:STAT:L1 10A Set the static load parameter L1 = 10A.
CURR:STAT:L1 MAX Set the static load parameter L1 =
maximum value.
CURR:STAT:L1 MIN Set the static load parameter L1 =
minimum value.
Query Syntax: CURRent:STATic:L1?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Ampere]
Query Example: CURR:STAT:L1?
CURR:STAT:L1? MAX
CURR:STAT:L1? MIN
CURRent:STATic:L2
Type: Channel-Specific
Description: Set the static load current for constant current static mode.
Setting Syntax: CURRent:STATic:L2<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:STAT:L2 20 Set the static load parameter L2 = 20A.
CURR:STAT:L2 10A Set the static load parameter L2 = 10A.
CURR:STAT:L2 MAX Set the static load parameter L2 =
maximum value.
CURR:STAT:L2 MIN Set the static load parameter L2 =
minimum value.
Query Syntax: CURRent:STATic:L2?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Ampere]
Query Example: CURR:STAT:L2?
CURR:STAT:L2? MAX
CURR:STAT:L2? MIN
CURRent:STATic:RISE
Type: Channel-Specific
Description: Set the rising slew rate of current for constant current static mode.
Setting Syntax: CURRent:STATic:RISE<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:STAT:RISE 2.5 Set rising slew rate to 2.5A/μs.
CURR:STAT:RISE 1A/μs Set rising slew rate to 1A/μs.
CURR:STAT:RISE MAX Set rising slew rate to the
maximum value of static load.
CURR:STAT:RISE MIN Set rising slew rate to the
minimum value of static load.

Chroma 63600 Series Specifications

General

Series	63600
Operating Temperature	0°C to 40°C
Modes	CC, CV
Interface	GPIB, USB
Protection	OCP, OTP, OVP
Voltage Resolution	1mV
Cooling	Forced Air